A foldable wire mesh cage is convenient to use, and it folds flat when idle to save space. But unfolding a folded cage needs two people working together. Unfolding steps: Two people stand on either side of the cage. First stand up the front mesh panel, then raise the connected side and rear panels. Insert the two side panels into the base from the opposite direction, keeping the joints with the front panel aligned. Finally slide the front panel's door latch into the side panel and the cage is assembled. After assembly, check that the four corners are flat and even. If they are not flat, do not use the cage yet - check that the mesh panels and door latches are fully seated, otherwise an accident can occur during use. The benefits of the cage itself, in passing: 1. Uniform specs and fixed capacity give clear storage and easy stocktaking. 2. Paired with a stacker, lift, or crane, it stacks four layers high for three-dimensional storage. 3. Simple operation, wide use, long service life. 4. Working with stackers, trolleys, and hydraulic pallet trucks, it carries material from raw stock to finished goods, cutting handling damage and labor. 5. A sturdy build: high-strength wire spot-welded, bottom U-channel welded for reinforcement, with dedicated foot frames for safe work; the foldable design saves space when idle.